Martin Rush Batten 1 Hex Işık Sistemi:
12-CELL COLOR BATTEN WASH
- 12-cell batten with RGBAW+UV 6-in-1 LEDs
- Full pixel control of individual LEDs
- Removable diffuser/lens that increases the beam angle from 25° to 32°
- Electronic dimming and Strobe
- Brackets are available for floor or truss mounting
- Lightweight construction (8 kg / 15 lbs.)
- Bright batten with 12 individually-controllable RGBAW+UV LEDs
- Electronic dimming, strobe, and pulse effects
- 25° and 32° beam angles available
Martin Rush Batten 1 Hex Sahne Işık Sistemleri Teknik Özellikleri:
PhysicalDimensions (L x W x H): 900 x 100 x 200 mm (35.4 x 3.9 x 7.9 in.)Weight: 6.8 kg (15 lbs.)
Dynamic EffectsDimming: 0 – 100%, coarse & fine controlShutter: Strobe & pulse effects, instant open and blackoutColor: RGBAWUV (6-in-1) color mixing
Control and ProgrammingControl system: USITT DMX512/1990 with RDMDMX channels: 13, 80RDM compliance: ANSI/ESTA E.120Interface: Control panel with backlit LCD display
OpticsBeam angle: 25° (without diffuser), 33° (with diffuser)Field angle: 44° (without diffuser), 63° (with diffuser)
ConstructionColor: BlackHousing: Extruded aluminium, thermoplastic end capsIP rating : IP 20
InstallationMounting points : Adjustable bracket, surface or truss mountLocation: Indoor location onlyOrientation: AnyMinimum distance to illuminated surfaces: 0.5 m (20 in.)Minimum distance to combustible materials: 0.1 m (4 in.)
ConnectionsAC power input/output: Neutrik PowerConDMX & RDM data in/out : 3-pin and 5-pin locking XLR
ElectricalAC power: 100-240 V nominal, 50/60 HzPower supply unit: Auto-ranging electronic switch modeFuse: T 250 V 1.0 AMaximum total power consumption: 148 WTypical half-cycle RMS inrush current: 9.7 ARecommended Miniature Circuit Breaker when power linking* : Type D*Per IEC 60898/UL489/CSA C22.2 No. 5
Typical Power and Current100 V, 60 Hz: 148 W, 1.6 A, PF 0.978120 V, 60 Hz: 148 W, 1.3 A, PF 0.972230 V, 50 Hz: 148 W, 0.78 A, PF 0.821Measurements made at nominal voltage. Figures are typical, not maximum, allow for a deviation of +/- 10%.
ThermalCooling: ConvectionMaximum ambient temperature (Ta max.): 40° C (104° F)Minimum ambient temperature (Ta min): 0°C (32° F)
ApprovalsEU safety: EN 60598-2-17 (EN 60598-1), EN 62471, EN 62493EU EMC: EN 55015, EN 55032, EN 55103-2, EN 61000-3-2, EN 61000-3-3, EN 61547US safety: UL 1573US EMC: 47 CFR 15 Class ACanadian safety : CSA C22.2 No. 166Canadian EMC : ICES-003 Class AAustralia/NZ: RCM
Included ItemsPower cable, 1.5 m without mains plug
AccessoriesInstallation hardwareHalf-coupler clamp: P/N 91602005G-clamp (vertical hanging suspension only): P/N 91602003Quick-trigger clamp (vertical hanging suspension only) :P/N 91602007Safety cable, 60Kg, BGV C1: P/N 91604006Cables, 16 A, for connection to power in chainsPower relay cable 3 x 2.5 mm2, H07RN-FPOWCON-POWCON 1.2 m (3.9 ft.) : P/N 91611798Power relay cable 3 x 14 AWG, SJOOWPOWCON-POWCON 1.2m (3.9 ft.) : P/N 91610175Power relay cable 3 x 2.5 mm2, H07RN-FPOWCON-POWCON 2.5m (8.2 ft.): P/N 91611799Power relay cable 3 x 14 AWG,SJOOWPOWCON-POWCON 2.5m (8.2 ft.) : P/N 91610176Cables, 16 A, for power inputPower input cable 3 x 2.5 mm2, H07RN-FOPEN-POWCON 1.5 m (4.9 ft.): P/N 91611800Power input cable 3 x 14 AWG, SJOOWOPEN-POWCON 1.5 m (4.9 ft.): P/N 91610177Power input cable 3 x 2.5 mm2, H07RN-FOPEN-POWCON 5.0 m (16.4 ft.): P/N 91611801Power input cable 3 x 14 AWG, SJOOWOPEN-POWCON 5.0 m (16.4 ft.): P/N 91610178(H07RN-F are European approved cables, SJOOW are US approved cables)Power connectorsPower Connector PowerCON Male: P/N 91611795Power Connector PowerCON Female : P/N 91611794