Martin RUSH MH 10 Beam FX
- Bright 60 W Osram RGBW LED engine
- Collimator lens with tight 4.5° beam angle
- Ambient glow ring with 24 individually pixel-controllable RGB LEDs
- Electronic dimming and Strobe
- Temperature-controlled fan cooling
- Unlimited Pan & Tilt rotating
- 3 + 5 pin XLR DMX connection
- Neutrik TRUE 1 in and thru socket
- Compact size—L: 275 x W: 188 x H: 325 mm / L: 10.8 x W: 7.4 x H: 12.8 in
- Low weight—7.5 kg/16.5 lbs.
Martin Rush MH 10 Beam FX Teknik Özellikler:
PhysicalLength: 275 mm (10.8 in.)Width: 188 mm (7.4 in.)Height: 325 mm (12.8 in.)Weight: 7.5 kg (16.5 lbs.)
Dynamic EffectsBeam color mixing: RGBWRing color mixing: RGB, grouped or individual control of 24 cellsVirtual color wheel: 33 color presets, virtual color wheel rotation effects, random color (independent in beam and ring)Pre-programmed effects: FX (effect macros) in ring with variable speed and direction of sequences, synchronization and chases across multiple fixturesDimming: 0-100%, coarse and fine control (independent in beam and ring)Electronic shutter effect: Strobe effect, pulse effects, instant open and blackout (independent in beam and ring)Pan: 540°Tilt: 270°Pan and tilt rotation effect: Constant, variable speed and direction
Control and ProgrammingControl options: DMX, RDM, stand-alone, master/slaveDMX channels: 24 or 93Stand-alone trigger options: Music trig, auto trigSetting and addressing: Control panel with backlit LCD displayPan and tilt speed: Adjustable via onboard control panel and DMXDMX compliance: USITT DMX512/1990RDM compliance: ANSI/ESTA E1.20
OpticsBeam effect light source: 60 W RGBW Osram LE RTDUW S2WPRing effect light source: 24 x 0.25 W RGB LEDsCutoff beam angle: 4.4°Minimum LED lifetime: 20 000 hours to >70% luminous output**Under manufacturer's test conditions
ConstructionColor: BlackHousing: High-impact flame-retardant thermoplasticProtection rating: IP20
InstallationMounting points: Two quarter-turn omega brackets for rigging clampsLocation: Indoor use only, must be fastened to surface or structureOrientation: AnyMinimum distance to illuminated surfaces: 200 mm (8 in.)Minimum distance to combustible materials: 100 mm (4 in.)Minimum clearance around fans and air vents: 100 mm (4 in.)
ConnectionsAC power in, thru: Neutrik TRUE1DMX data in, thru: 3-pin and 5-pin locking XLR
ElectricalAC power: 100-120 / 200-240 V nominal, 50/60 HzPower supply unit: Auto-ranging electronic switch mode
Typical Power and Current120 V, 60 Hz 0.85 A, 100W, PF 0.99230 V, 50 Hz 0.49 A, 108W. PF 0.99Measurements made at nominal voltage with all LEDs at full intensity. Allow for a deviation of +/- 10%.
ThermalCooling: Forced air (temperature-regulated, low noise)Maximum ambient temperature (Ta max.): 40° C (104° F)Minimum ambient temperature (Ta min.): 0° C (32° F)Total heat dissipation (calculated, +/- 10%, at full intensity, full white): 1300 BTU/hr.
ApprovalsEU safety: EN 60598-2-17 (EN 60598-1), EN 62471, EN 62493EU EMC: EN 55103-1, EN 55103-2, EN 61000-3-2, EN 61000-3-3US safety: UL 1573US EMC: CFR Title 47 Part 15 Class ACanadian safety: CSA C22.2 No. 166Canadian EMC: ICES-003 Class AAustralia/NZ (pending): RCM
Included ItemsPower cable, 1.5 m (4.9 ft.), without mains plug
AccessoriesCables, 16 A, for connection to powerPower input cable, H07RN-F, 2.5 mm², 14 AWG, bare ends to Neutrik TRUE1 NAC3FX-W (female), 1.5 m (4.9 ft.): P/N 91611797Power input cable, H07RN-F, 2.5 mm², 14 AWG, bare ends to Neutrik TRUE1 NAC3FX-W (female), 5 m (16.4 ft.): P/N 91611786Power input cable, SJOOW, 12 AWG, bare ends to Neutrik TRUE1 NAC3FX-W (female), 1.5 m (4.9 ft.): P/N 91610173Power input cable, SJOOW, 12 AWG, bare ends to Neutrik TRUE1 NAC3FX-W (female), 5 m (16.4 ft.): P/N 91610174Cables, 16 A, for relaying power in chainsPower relay cable, H07RN-F, 2.5 mm², TRUE1 to TRUE1, 0.45 m (1.5 ft.): P/N 91611784Power relay cable, H07RN-F, 2.5 mm², TRUE1 to TRUE1, 1.2 m (3.9 ft.): P/N 91611785Power relay cable, H07RN-F, 2.5 mm², TRUE1 to TRUE1, 2.5 m (8.2 ft.): P/N 91611796Power relay cable, SJOOW, 12 AWG, TRUE1 to TRUE1, 0.45 m (1.5 ft.): P/N 91610170Power relay cable, SJOOW, 12 AWG, TRUE1 to TRUE1, 1.2 m (3.9 ft.): P/N 91610171Power relay cable, SJOOW, 12 AWG, TRUE1 to TRUE1, 2.5 m (8.2 ft.): P/N 91610172ConnectorsPower connector, cable mount, Neutrik TRUE1 NAC3FX-W (female): P/N 91611789Power connector, cable mount, Neutrik TRUE1 NAC3MX-W (male): P/N 91611788DMX data linkDMX termination plug, 3-pin male XLR: P/N 91613017Installation hardwareG-clamp (installation hanging vertically downwards only): P/N 91602003Half-coupler clamp: P/N 91602005